Re: [dvd::rip] 2.0KB avi file after rip/transcode?

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Todd Harris wrote:
> Here you go:
> 
> toharris@toharrisIBMt43:~> mkdir -m 0775 -p
> '/home/toharris/dvdrip-data/BatmanBegins/tmp' && cd
> /home/toharris/dvdrip-data/BatmanBegins/tmp && mkdir -p
> /home/toharris/dvdrip-data/BatmanBegins/avi/001 && execflow -n 19 transcode
> -H 10 -a 2 -x vob -i /home/toharris/dvdrip-data/BatmanBegins/vob/001/ -w
> 1226,50 -b 160,0,0 --a52_drc_off -J
> smartyuv=threshold=10:Blend=1:diffmode=2:highq=1 -f 24,1 -M 2 -Y 44,0,44,0
> -B 15,10,8 -y xvid --psu_mode --nav_seek
> /home/toharris/dvdrip-data/BatmanBegins/tmp/BatmanBegins-001-nav.log--no_split
> 
> -o /home/toharris/dvdrip-data/BatmanBegins/avi/001/BatmanBegins-
> 001.avi --print_status 25 && echo EXECFLOW_OK
> EXEC_FLOW_JOB_PID=5621
> transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
> [transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
> [transcode] auto-probing source
> /home/toharris/dvdrip-data/BatmanBegins/vob/001/ (ok)
> [transcode] V: import format    | MPEG-2  (V=vob|A=vob)
> [transcode] V: AV demux/sync    | (2) initial MPEG sequence / enforce frame
> rate[transcode] V: import frame     | 720x480  1.50:1  encoded @ 16:9
> [transcode] V: new aspect ratio | 640x360  1.78:1 (-B)
> [transcode] V: clip frame (->)  | 640x272
> [transcode] V: bits/pixel       | 0.294
> [transcode] V: decoding fps,frc | 23.976,1
> [transcode] V: Y'CbCr           | YV12/I420
> [transcode] A: import format    | 0x2001  AC3/A52      [48000,16,2]
> [transcode] A: export format    | 0x55    MPEG layer-3 [48000,16,2]  160
> kbps
> [transcode] V: encoding fps,frc | 23.976,1
> [transcode] A: bytes per frame  | 8008 (8008.000000)
> [transcode] A: adjustment       | 0@1000
> [transcode] V: IA32/AMD64 accel | sse2 (sse2 sse mmxext mmx asm C)
> tc_memcpy: using sse for memcpy
> [transcode] V: video buffer     | 10 @ 720x480
> [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM |
> (subtitle)
> [filter_smartyuv.so] options=threshold=10:Blend=1:diffmode=2:highq=1
> [filter_smartyuv.so] (MMX) 0.1.4 (2003-10-13) Motion-adaptive deinterlacing
> [export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka API
> 4.0)
> | (audio) MPEG/AC3/PCM
> [export_xvid4.so] Reading configuration from './xvid4.cfg'
> [export_xvid4.so] Reading config section 'features' from './xvid4.cfg'
> [export_xvid4.so] Reading config section 'quantizer' from './xvid4.cfg'
> [export_xvid4.so] Reading config section 'cbr' from './xvid4.cfg'
> [export_xvid4.so] Reading config section 'vbr' from './xvid4.cfg'
> Audio: using new version
> Audio: using lame-3.96.1
> (split.c) reading auto-split information from file
> "/home/toharris/dvdrip-data/BatmanBegins/tmp/BatmanBegins-001-nav.log"
> (split.c) done reading 201427 entries
> (split.c) chunk 0/0 PU=0 (-L 0 -c 0-114840) mapped onto (-L 0 -c 0-114840)
> [import_vob.so] tccat -i "/home/toharris/dvdrip-data/BatmanBegins/vob/001/"
> -t vob -d 0 -S 0 | tcdemux -a 2 -x ac3 -S 0,0-9590 -M 2 -d 0 | tcextract -t
> vob -a 2 -x ac3 -d 0 | tcdecode -x a52 -d 0 -A 1
> [import_vob.so] tccat -i "/home/toharris/dvdrip-data/BatmanBegins/vob/001/"
> -t vob -d 0 -S 0 | tcdemux -s 0x82 -x mpeg2 -S 0,0-9590 -M 2 -f
> 23.976024 -P
> /tmp/filev6jHe2   -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x
> mpeg2 -d 0 -y yv12
> (demuxer.c) seeking to sequence 0:0 ...
> tc_memcpy: using sse for memcpy
> tc_memcpy: using sse for memcpy
> (demuxer.c) seeking to sequence 0:0 ...
> [decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
> [decode_mpeg2.c] libmpeg2 acceleration: mmxext
> 
> (V) fill=0/11, empty=1 wait=0 locked=0, ready=0, tag=0
> (A) fill=0/11, empty=1 wait=0 locked=0, ready=0, tag=0
> 
> (decoder.c) sleeping for 6 seconds to cool down
> (split.c) reading auto-split information from file
> "/home/toharris/dvdrip-data/BatmanBegins/tmp/BatmanBegins-001-nav.log"
> (split.c) done reading 201427 entries
> (split.c) chunk 0/0 PU=1 (-L 0 -c 0-86587) mapped onto (-L 2024096 -c
> 0-86587)
> [import_vob.so] tccat -i "/home/toharris/dvdrip-data/BatmanBegins/vob/001/"
> -t vob -d 0 -S 2024096 | tcdemux -a 2 -x ac3 -S 0,0-7229 -M 2 -d 0 |
> tcextract -t vob -a 2 -x ac3 -d 0 | tcdecode -x a52 -d 0 -A 1
> [import_vob.so] tccat -i "/home/toharris/dvdrip-data/BatmanBegins/vob/001/"
> -t vob -d 0 -S 2024096 | tcdemux -s 0x82 -x mpeg2 -S 0,0-7229 -M 2 -f
> 23.976024 -P /tmp/file7pPre5   -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 |
> tcdecode -x mpeg2 -d 0 -y yv12
> (demuxer.c) seeking to sequence 0:0 ...
> tc_memcpy: using sse for memcpy
> tc_memcpy: using sse for memcpy
> (demuxer.c) seeking to sequence 0:0 ...
> [decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
> [decode_mpeg2.c] libmpeg2 acceleration: mmxext
> 
> (V) fill=0/11, empty=2 wait=0 locked=0, ready=0, tag=0
> (A) fill=0/11, empty=2 wait=0 locked=0, ready=0, tag=0
> 
> (decoder.c) sleeping for 6 seconds to cool down
> (split.c) reading auto-split information from file
> "/home/toharris/dvdrip-data/BatmanBegins/tmp/BatmanBegins-001-nav.log"
> (split.c) done reading 201427 entries
> 
> clean up | frame threads | unload modules | cancel signal | internal
> threads
> | done
> [transcode] encoded 0 frames (201426 dropped, 0 cloned), clip length  
> 0.00s
> EXECFLOW_OK
> toharris@toharrisIBMt43:~/dvdrip-data/BatmanBegins/tmp>
> 
> 
> On 11/3/06, Edmund Mergl <e.mergl@xxxxxxxx> wrote:
>>
> Todd Harris wrote:
>> Anyone end up with a 2.0KB avi file after the rip/transcode process is
>> finished? I'm using xvid4 (or xvid) as the codec. I've tried
> starting at
>> frame 25 or 250 per a previous poster's issue, but that didn't work.
> This
>> file also doesn't play in mplayer, totem, or xine. It says the codec is
>> missing. I have all the w32codecs installed. What type of a problem
> does
>> this show?
> 
>> Running SUSE, latest version of dvd::rip, all dependencies installed.
> 
> 
> grab the last call to transcode from the logfile and issue this command
> from the command-line.
> Watch if there are any error messages.
> 
> Edmund
> 
>>

a possible solution which has helped sometimes is to remove the option -H 10
or even to replace it by -H 0. But don't use the whole command chain. Cd 
manually
into the tmp directory and issue only the transcode command.

Edmund
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)

iD8DBQFFTDfhErqt6MLpGJ0RAoXgAKCkhSC+GC795iclNgpIwzCbF+oEtQCggWQ3
evrdZ3348xr9+XUyzQ/9sEk=
=rC/K
-----END PGP SIGNATURE-----